# BoomerBiker: Gyroscopic Precession

Boomer Biker tries to get it right, but ends up in a muddled mess anyway, with statements such as these:

“Gyroscopic precession” is the tendency of a rapidly spinning object to resist being tilted.

and

Precession is far more powerful than gyroscopic stability.

Oddly, the first statement is immediately followed by a dictionary definition which contradicts it.

The second statement is one of several that invokes “gyroscopic stability” as though it were some phenomenon different from precession.

What appears to be stability is exactly precession. Spinning objects respond to an applied torque by rotating about a third axis, perpendicular to both the spin axis and the axis of the applied torque and at a rate inversely proportional to the spin rate. That is all. If a gyroscope or a spinning bike wheel is prevented from precessing, as the rear wheel of a bike usually is, it moves in response to an applied torque exactly as it would if it were not spinning. There is no magic stability.

Professor Cossalter, on page 304 of the second edition of his in his excellent Motorcycle Dynamics, calculates the roll moment generated by gyroscopic effect for a motorcycle traveling at 22 m/s (79 km/h or 49 mph) to be 3.5 N-m (2.6 lb-ft) and compares it to the roll moment generated by the accelerating contact patches of 30 N-m (22 lb-ft), which is 8.6 times larger. He concludes with the note that the gyroscopic effect is present from the instant torque is applied at the handlebars, and the roll moment generated by the lateral force of the tires can take some time, ~0.1 seconds in this example, to build up.